Vertical In-line
Vertical In-line
BELL & GOSETTE Series e-80 Close Coupled In-Line Pumps Pump Design: Close-Coupled, In-Line
Materials Available: Stainless Fitted Power: Single Phase, Three Phase
Available in sizes 1.5” through 8”, with motors from .25 to 50 HP at 1750 RPM and 5 to 60 HP at 3500 RPM. The Series e-80 is available in 175#, 250#, and 300# working pressure designs.
Are designed according to the European Standard BS EN733/DIN24255, with air- bleeding device, advanced in structure, compact in size, less room-required for installation and easy to maintain.
Features:
Vertical Inline Close Coupled Pumps are specifically designed for mounting, in any position, directly in a pipeline. The suction and discharge nozzles are located on the same centerline 180º apart.
Vertical Inline Close Coupled Pumps are specifically designed for mounting, in any position, directly in a pipe line. The suction and discharge nozzles are located on the same centerline 180º apart. Vertical pumps significantly reduce the space required; two pumps fit in the space of one. They are easy to maintain; simply remove the capscrews and the motor and bracket assembly is easily removed from the casing without disturbing the piping.
The SV pump is a non-self-priming vertical multistage pump coupled to a standard motor. The liquid end, located between the upper cover and the pump casing, is held in place by tie rods. The pump casing is available with different configurations and connection types.
-Heating System & Agricultural irrigation
-Air conditioning system & flushing and cleaning system
-Filtration and transportation, pipeline pressurization
-Cooling water circulation, boiler feed water
-Water treatment system, equipment supporting system
-Widely Applicable
-Low energy saving
-Anti rust and anti-corrosion
-Easy to operate & personalized customization
-Back-pull structure can be repaired without disassembling the pipeline
-HVAC: Circulation of hot water, boiler mix-flow etc.
-Air-conditioning system: cooling water circulation.
-Water supply system: filtration and transfer and water works, industrial applications.
-Fire fighting.
-Dry running protection with mechanical seal
-Fully enclossed air-cooled standard motor
-Stainless steel shaft & Cast Iron/Stainless steel impeller
-The pump is a top pull out design. During routine maintenance, the pump head (motor base and impeller) can be removed, maintained and overhauled without dismantling the pump body and piping on both sides.
-Transferring liquids of low viscosity, non-inflammable and non-explosive, not containing solid particles or fibers.
-Water supply & drainage for high-rise buildings, filtration and transfer at waterworks, pressure boosting in main pipe.
-Washing and cleaning systems, boiling feeding, cooling water circulation, water treatment systems, auxiliary system, support equipment.
-Ultra filtaration systems, reverse-osmosis systems, distillation system, separators, swimming pools.
-Agriculture irrigation: sprinkler irrigation, drip-feed irrigation,
-Food and beverage industry.
-Firefighting system.
-Stainless Steel pump body
-Stainless Steel Impeller
-Stainless Steel 316 Shaft
-Max. Ambient Temperature +40°C
-Max operating pressure 33 bar
-Altitude up to 1000m
-Totally Enclosed & Fan cooled motor
-Liquid Temperature -20°C – +120°C
-Ingress Protection – IP55
