Pumps
Pump Application
Brands
Pump Type
Model
EBARA – Horizontal End Suction – 3M SERIES
Close coupled centrifugal pumps in compliance with EN 733 (former DIN 24255). Standard construction material is stainless steel AISI 304.
- Capable of producing up to 1000 GPM (3785 LPM).
- Power rating up to 75 HP (55 kW).
- Self-ventilated 2 poles motor.
- Class of insulation: F.
- IP 55 protection degree.
- 230V/380V/440V, 60 Hz three phase voltage.
EBARA – Horizontal End Suction – 3PF SERIES
The Ebara 3PF centrifugal pumps range from Prestige Pumps offer a solid stainless steel long coupled construction to maximum reliability.
- Can handle clean water and moderately aggressive fluids
- With maximum working pressure of 1 MPa
- Casing and Impeller is AISI 304
EBARA – Horizontal End Suction – CDX SERIES
CDX is a surface centrifugal electric pump with radial impeller, with hydraulics completely in molded AISI 304, whose components are obtained through the hydroforming process, which guarantees strength, hydraulic efficiency and reliability.
EBARA – Semi-Vortex – DVS SERIES
The DVS model pump has a unique semi-vortex construction of EBARA’s own design. This pump is as efficient as a conventional non-clog pump which uses the centrifugal force of eddy to pump liquids. As you can see, any foreign matter sucked into the pump must pass the impeller, which can result in trouble caused by clinging grass and clogged stones.
EBARA – Sewage – DS SERIES
Submersible wastewater pump with efficient semi open impeller and cast-iron casing and impeller. Portable and light-weight, optional with quick discharge connector.
- Efficient Semi-Open Impeller
- Strainer prevents blockage.
- Class F motor insulation
- 2 pole, air-filled watertight
EBARA – Sewage – DW SERIES
EBARA DW is a Sewage Pump with pump body, motor casing, and impeller made of stainless material but this model has single channel design impeller but there is special version with vortex impeller called DW – VOX
- Total head from 2.2 to 20 m
- Capacity from 6 to 54 m3/hr
- Maximum immersion 7 m
- Maximum liquid temperature 40 degrees Celcius
- Maximum Solid size passage 50 mm
EBARA – Sump, Effluent, Sewage – DL SERIES
For Sump, Effluent, Wastewater and Sewage. A comprehensive range of Reliable, High quality Submersible pumps. Of robust Cast iron construction, with many designs features
- Unique impeller design prevents overload under severe operation conditions
- Semi-open non-clog impellers prevent pump clog by foreign matter.
- The protective device built into the motor prevents the motor from damage as a result of over-current or abnormal temperature rise of the coil.
- Optional quick discharge connector facilitates easy installation and maintenance
- Range of models is up to 300mm discharge and up to 45kW available
- Cutter type version
EBARA – Sump, Effluent, Sewage – DML SERIES
For Sump, Effluent, Wastewater and Sewage. A comprehensive range of Reliable, High quality Submersible pumps. Of robust Cast iron construction, with many design features.
- Non-clog Single channel impeller 3″ passage
- Robust construction
- Double mechanical seal in oil chamber Long life
- High efficiency and energy savings
- Range of Models up to 150 mm discharge
EBSRAY – Horizontal End Suction – ISO SERIES
General Purpose Horizontal End Suction pumps provide easy maintenance for its back pull-out design. Can be coupled to an Engine and an Electric Motor.
- Cast Iron Casing and Bronze impeller.
- Available in International Standards: ISO 2858
EBSRAY – Horizontal End Suction – STREAMLINE DIN
General Purpose Horizontal End Suction pumps provide easy maintenance for its back pull-out design. Can be coupled to an Engine and an Electric Motor.
- Cast Iron Casing and Bronze impeller.
- Available in International Standards: DIN 24255
EBSRAY – Horizontal Split Case – EHS SERIES
HORIZONTAL DOUBLE-SUCTION SPLIT CASE
- Pump casing is in nice linearity design with stiffeners. Two bearing are located at a short distance, and the shaft is accordingly shortened, so that shaft, bearings, and mechanical seals would be kept in a long service life.
- Cast Iron casing, bronze impeller, ASTM420 shaft, mechanical seal
EBSRAY – Vertical In-Line – EG SERIES
Are designed according to the European Standard BS EN733/DIN24255, with air- bleeding device, advanced in structure, compact in size, less room-required for installation and easy to maintain.
Features:
- Cast Iron casing, bronze impeller, ASTM420 shaft, mechanical seal
EMAUX – SPH Series
Emaux has developed the SPH Series by answering a call from pool professionals for a reliable, economical pump for new installations and retrofitso.
FAIRBANKS NIJHUIS – Horizontal End Suction – 1600 SERIES
Features:
- Offered in two models:
1650 close coupled
1620 flexible coupled-frame mounted - 316 SST impeller
- 316 SST shaft sleeve
- Double volute on 4″ discharge and larger to reduce bearing loads
- Gauge taps on suction and discharge on flanged models
- 4 power frame sizes
- Casing feet for easy back pullout
- Regreaseable bearings (1620 only)
- Coupling guard (flex coupled design)
- Formed steel base (flex coupled design)
FAIRBANKS NIJHUIS – Horizontal End Suction – 1600F SERIES
- Horizontal end suction fire pumps, are specifically designed to significantly reduce fire pump space requirements. Available with for electric motor and diesel engine driver, the pumps can address a wide range of fire pump applications. -Fairbanks Nijhuis’ end suction fire pumps feature a back pullout design for easy disassembly and maintenance. Simply remove the motor and bracket or engine assembly for service or inspection; the casing remains in the pipeline.
- UL Listed, FM Approved Performance
- Electric and Diesel
- Back Pullout Design for Easy Pump Service without Disconnecting Pipe
- Frame-Mounted Design
- Small Footprint Ideal for Retrofit
FAIRBANKS NIJHUIS – Horizontal Split Case – 1800 & 1900 SERIES
- Bronze fitted pump construction
- Bronze shaft sleeves
- Dynamically balanced impellers
- Bronze case wearing rings
- Twin volute on 10″ and larger pumps
- Stainless steel impeller key
- Regreaseable ball bearings
- Single row ball bearing (inboard)
- Double row ball bearing (outboard)