Products - Eastman

All Products

Pump Application

Pump Type

Brands

Model

Goulds Water Technology – Horizontal End Suction – 3656 SERIES

By admin-nw | August 14, 2022

The 3656 Series pumps from Goulds Water Technology offers close coupled design for space saving and simplified maintenance. Available in all iron, bronze fitted or all bronze construction for application versatility.

Back pull-out to reduce maintenance downtime.
Standard Type 21 mechanical seal for both reliability and availability. Carbon/ceramic/ BUNA standard, with other faces and elastomers available.
3656 available in all iron, bronze fitted or all bronze construction for application versatility.
Replaceable wearing components include stainless steel shaft sleeve and casing and hub wear rings to maintain peak efficiency.
Packed box sealing is also available as an option.
Enclosed impeller design, dynamic balancing, and renewable wear rings reduce losses affecting performance and pump life.
Suction and discharge pipe connections are NPT threaded, except 3 x 4 7 which has 125 lb. ANSI flat-faced flanges.
Rigid cast iron motor adapter provides support and registered fits maintain positive unit alignment.
Standard NEMA motor frame, JM or JP shaft extension, C-face mounting, single phase or three phases, 3500 or 1750 RPM.

Goulds Water Technology – Horizontal Multistage – E-MP SERIES

By admin-nw | August 13, 2022

The e-MP series is a highly efficient multistage, radially split, segmented casing pump.

Suction Impeller – wider inlet diameter reduces velocity of liquid for reduced friction and increased suction capability.
U-turn Channels – salient rounded edges ensure a balanced velocity allocation of liquid to reduce losses and increase hydraulic efficiency.
Balancing System – uses the force of pumped liquid to reduce load on mechanical seal and wear on the bearings.
Seal Housing – self-cleaning to ensure seal longevity.
Sensor Interfaces – connect to intelligent plant monitoring and diagnostic system to measure performance.
Plain Bearings – elastically supported to resist extreme vibrations and shocks (e- MPA, e-MPR and e-MPV). Made of tungsten carbide.

Goulds Water Technology – Jet Pumps – J+ SERIES

By admin-nw | August 14, 2022

Goulds J+ Series pump is a convertible type of pump, which may be used on shallow or deep well application with appropriate goulds pump fittings.

Back pullout design for service without disturbing piping.
Two compartment motor for access to wiring and replaceable components.
Nozzle cleans out a plug in shallow good adapter.
Corrosion resistant, plastic tubing, and fittings are easily removed for cleaning. Premium O-ring design fittings need only be hand tight to seal.
F.D.A. compliant, glass filled Noryl. Corrosion and abrasion resistant.
Bolt down Lexan® diffuser has a stainless wear ring for extended performance in abrasive conditions.
Pump ratings are within the motor manufacturer’s recommended working limits.
Can be operated continuously without damage.
FDA Compliant Impeller.

Goulds Water Technology – Jet Pumps – JS+ SERIES

By admin-nw | August 14, 2022

Goulds JS+ Series pump has a designed to integral shallow well adapter built into casing, which eliminates the need for separate shallow well adapter.

Back pullout design for service without disturbing piping.
Two compartment motor for access to wiring and replaceable components.
Nozzle cleans out a plug in shallow good adapter.
Corrosion resistant, plastic tubing, and fittings are easily removed for cleaning. Premium O-ring design fittings need only be hand tight to seal.
F.D.A. compliant, glass filled Noryl®. Corrosion and abrasion resistant.
Bolt down Lexan® diffuser has a stainless wear ring for extended performance in abrasive conditions.
Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage.
FDA Compliant Impeller.

Goulds Water Technology – Jet Pumps – SJ SERIES

By admin-nw | August 14, 2022

High Capacity and Pressure: Specifically designed to deliver high capacities at deeper settings.
Stainless Steel Pump Shaft: Hex design provides positive drive for impellers and eliminates clearance adjustments.
Easy to Service: Can be taken apart for service by removing four bolts.
Corrosion Resistant: Glass filled thermoplastic impellers. Stainless steel wear rings and coverplates. Electro-coated paint process applied inside and out and then baked on.
Easy to Prime: Top mounted vent plug allows air to escape from seal cavity during initial priming.
Adjustable Automatic Pressure Control Valve:
Back pullout design for service without disturbing piping.
Two compartment motor for access to wiring and replaceable components.
F.D.A. compliant, glass filled Noryl®. Corrosion and abrasion resistant.

Goulds Water Technology – Non-UL/FM Fire Pump, Jockey, Booster, & Transfer – e-GS SERIES

By admin-nw | August 13, 2022

Stainless Steel Submersible Pump for 4” And Larger Wells

Innovative, Proven Hydraulics
Up to 13% Efficiency Improvement
Fewer models, same hydraulic coverage.
Premium Stainless-Steel casing, motor adapter, discharge head
Built-in Stainless Steel check valve
Convenient Serviceability
Superior Sand Handling

Goulds Water Technology – Submersible Deepwell/Borehole – GS SERIES

By admin-nw | August 13, 2022

Stainless Steel Submersible Pump for 4” And Larger Wells

Innovative, Proven Hydraulics
Up to 13% Efficiency Improvement
Fewer models, same hydraulic coverage.
Premium Stainless Steel casing, motor adapter, discharge head
Built-in Stainless Steel check valve
Convenient Serviceability
Superior Sand Handling

Goulds Water Technology – Submersible Deepwell/Borehole – L SERIES

By admin-nw | August 13, 2022

Stainless steel casing and impellers.
NSF compliant; applicable for drinking water.
Improved efficiency translates into lower life cycle costs and reduced energy consumption.
All stainless-steel construction means no water contamination from paint.
NSF/ANSI 61 Annex G certified.

Goulds Water Technology – Vertical In-Line – e-SV SERIES

By admin-nw | August 13, 2022

The SV pump is a non-self-priming vertical multistage pump coupled to a standard motor. The liquid end, located between the upper cover and the pump casing, is held in place by tie rods. The pump casing is available with different configurations and connection types.

Goulds Water Technology – Vertical Turbine – VIT-DITM/CATM/FFTM

By admin-nw | August 13, 2022

Lineshaft Short Set Turbine. Goulds Water Technology offers a wide variety of design options to suit most any short set turbine applications.

Cost Savings
Higher Pressure Ratings
Higher Horsepower Ratings
Increased strength and greater hanging weight capabilities
Potential to negate the need to use fabricated steel discharge heads
Capability to be drilled for ANSI suction can connections
Flexibility to fit multiple motor BD dimensions on the same head
All models are pre-machined for both threaded and flanged column connections
No need to purchase hanger flange
Better impact resistance
Lower thermal conductivity
Higher nozzle loads
Higher corrosion resistance

MDA – Horizontal End Suction – PA SERIES

By admin-nw | August 14, 2022

The MDA PA series pumps fully confirm to European pump standard DIN24255/BS EN733 and cover all sizes nominated. This standard covers both performance and dimensions.-

The pump has a back pull-out design
suitable spacer coupling is fitted to a direct coupled unit
the casing and the motor can remain in position while all other pumps can remove for simple and quick maintenance
European pump standard DIN24255/BS EN733

MDA – Horizontal End Suction – PAC SERIES

By admin-nw | August 14, 2022

The MDA PAC ser-The pump shaft & motor are closed coupled design
coupling ensures the alignment of pump and motor
impeller runs in good balance both dynamically and statically
design to be driven in IEC motor compared by PA pump direct coupled with motor
PAC series where much shorter in length compare to PA series
European pump standard DIN24255/BS EN733ies pumps are derived from PA Series according to European pump standard DIN24255/BS EN733 of performance
The pump shaft & motor are closed coupled design
coupling ensures the alignment of pump and motor
impeller runs in good balance both dynamically and statically
design to be driven in IEC motor compared by PA pump direct coupled with motor
PAC series where much shorter in length compare to PA series
European pump standard DIN24255/BS EN733

MDA – Horizontal End Suction – PISO SERIES

By admin-nw | August 14, 2022

The MDA PISO series design is accordance with international standard of ISO 2858, which mean Pmeanspump can be interchangeable with other similar pumps conforming to the same standard.
The pump casing: highly efficient cast iron volute casing with flanges
enlarge shaft: reduces shaft deflection
Bearings: heavy-duty or approved equivalent, greased for life, and reducing maintenance
Bearing houses: robust, heavy duty, manufactured in high strength cast iron
shaft seal: single and high-quality John crane
wear ring: cast iron wear ring
Impeller: cast iron/ 316 Stainless steel fitted
design in accordance with international standard of ISO 2858

MTH – Regenerative Turbine – 150-250-160-260-170-270 SERIES

By admin-nw | August 14, 2022

Regenerative turbine pumps represent the most economical, high performance alternative for low flow applications involving moderate to high pressures

No vapor binding, impellers are designed to handle up to 20% vapor in the liquid being pumped.
No metal-to-metal contact, clearances enable handling of non-lubricating fluids while maintaining adequate heads.
Low head requirements
Material options: Bronze, Cast Iron and Stainless Steel
Capacity flows up to 150 gallons per minute
Heads up to 1,150 feet
Power rating up to 60 horsepower

NM Fire – Non-UL/FM Fire Pump, Booster Pump, Transfer Pump

By admin-nw | May 13, 2025

Features: Carbon steel discharge head, AISI420 shaft, SS304 impeller, with packing gland seal & ductile cast iron suction bell.

« Previous
1
2

Categories

Pump Application

Pump Type

Brands

Model